View Single Post
  #3 (permalink)  
Old 03-29-2013, 12:48 AM
93JDMH22A4WS 93JDMH22A4WS is offline
I'm New
 
Join Date: Mar 2013
Posts: 6
iTrader: (0)
93JDMH22A4WS is on a distinguished road
Re: H22 Intake manifold gasket, and throttle body gasket .pdf outline / template

It's pretty cool. I got an Epilog Helix 50W CO2 laser. I run a company from home called Colorado Laser Engraving. Anyway, I still haven't been able to find a template, so I may just have to draw all my own templates from scans and scratch. Problem is that my scanner bed is not as wide as the gaskets, so I have to scan twice and overlay the images as best I can. My worry is that this will cause very slight alignment errors that would potentially affect performance.

Anyway, I spent about an hour tracing out a B18 intake manifold gasket to illustrate what I was looking for . Theoretically, if I could find a cache of templates for gaskets, I could be cutting hundreds of them a day, overnight.

I'm in the process of painting my Prelude right now, so I'll be sure to upload pics when it's done. Just ordered up 2 new 205.50/R15 Kumho's for the race season, too!

I'm laser engraving my new intake manifold with Cermark spray before it goes on. Think I'm going to attempt to engrave a cutaway design of an h22 engine/transmission on there. I'll post up some pictures of that too.
Attached Images
File Type: jpg B18 Exhaust manifold gasket.jpg (57.2 KB, 4 views)
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96