Honda Prelude Forum
 
Go Back   Honda Prelude Forum > Tech-Talk > General Tech Talk > Naturally Aspirated

Thread Title
h22 crank removal

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-21-2013, 10:42 AM
h23a1ftw's Avatar
Bronze Member
 
Join Date: Apr 2010
Location: Largo, florida
Posts: 185
iTrader: (1)
h23a1ftw is on a distinguished road
Send a message via Skype™ to h23a1ftw
h22 crank removal

I cant get the gear off of the water pump side, i've let it sit over night after spraying on wd-40 and still not even budging.. anyone have ideas how to remove it easier or do i have to spend 8hrs prying/pounding with a screwdriver and mallet?
__________________

'92 Prelude Si: H22a1 swap w/spun bearings - parts car :)
'89 240sx: ka24e - totaled
'95 VW Golf FRI VR6 - sold
'81 Chevy K10 Scottsdale: 350 beast - sold
'89 CRX HF: 1.5l SOHC - totaled
'94 Prelude Si: H23a1 - DD
'94Prelude Si: H23a1 - Overheated & sold
'88 GMC 1500: Straight six - Sold
'92 Prelude: F22 - Sold
'89 CRX: IDK - Totaled
'85 F-150: 302, cam, exhaust, etc. - Sold
Reply With Quote
  #2 (permalink)  
Old 02-21-2013, 11:05 AM
h23a1ftw's Avatar
Bronze Member
 
Join Date: Apr 2010
Location: Largo, florida
Posts: 185
iTrader: (1)
h23a1ftw is on a distinguished road
Send a message via Skype™ to h23a1ftw
Re: h22 crank removal

If thats not possible? I have a lighter.... and some candles. Lol
__________________

'92 Prelude Si: H22a1 swap w/spun bearings - parts car :)
'89 240sx: ka24e - totaled
'95 VW Golf FRI VR6 - sold
'81 Chevy K10 Scottsdale: 350 beast - sold
'89 CRX HF: 1.5l SOHC - totaled
'94 Prelude Si: H23a1 - DD
'94Prelude Si: H23a1 - Overheated & sold
'88 GMC 1500: Straight six - Sold
'92 Prelude: F22 - Sold
'89 CRX: IDK - Totaled
'85 F-150: 302, cam, exhaust, etc. - Sold
Reply With Quote
  #3 (permalink)  
Old 02-21-2013, 02:42 PM
twokexlv6coupe's Avatar
little green ghouls, buddy!!
Photobucket
 
Join Date: Apr 2006
Location: kitten mittens
Posts: 17,844
iTrader: (9)
twokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond repute
Send a message via AIM to twokexlv6coupe
Re: h22 crank removal

Quote:
Originally Posted by h23a1ftw View Post
If thats not possible? I have a lighter.... and some candles. Lol
tryna set the mood, eh??




Exactly which gear? crank timing gear? front balancer shaft gear? rear balancer shaft gear?
__________________

1995 Honda Prelude SE Turbo; 250whp, 275wtq @ 10psi Soldddd!!!

2000 Acura TL; DD
2005 Stage2.5+ Subaru WRB STi : RzKar!
Ivey Tuned - Advan - Cobb - Rallispec - CP - Perrin - ACT - KillerB - Carillo - TurboXS - Defi - Innovate - Walbro - DeatschWerks - Feal - H&R - Alpine - Infiniti - Curt

2001 Kawasaki STX1100 D.I. - Sold!
2007 Sea-Doo RXT 215; ET 127 +3 S/C impeller, DIY 3" intake, DIY resonator delete/free flow exhaust, DIY oil catch can, Rule 500gph bilge pump


Quote:
Originally Posted by Brash View Post
But you need that scoop on the hood. Is it true that they're big enough to fit your lunch box and all your camera gear in it?
Reply With Quote
  #4 (permalink)  
Old 02-21-2013, 03:09 PM
rocker22dallas's Avatar
Gold Member
 
Join Date: Sep 2012
Location: Southwest MI
Posts: 849
iTrader: (1)
rocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond reputerocker22dallas has a reputation beyond repute
Re: h22 crank removal

Quote:
Originally Posted by twokexlv6coupe View Post
tryna set the mood, eh??




Exactly which gear? crank timing gear? front balancer shaft gear? rear balancer shaft gear?
the title of the thread is h22 crank removal.
Reply With Quote
  #5 (permalink)  
Old 02-21-2013, 03:12 PM
twokexlv6coupe's Avatar
little green ghouls, buddy!!
Photobucket
 
Join Date: Apr 2006
Location: kitten mittens
Posts: 17,844
iTrader: (9)
twokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond repute
Send a message via AIM to twokexlv6coupe
Re: h22 crank removal

Quote:
Originally Posted by rocker22dallas View Post
the title of the thread is h22 crank removal.


i knew someone was gonna mention that.

and in order to completely remove the crank, you need to take the oil pump off.
in order to take the oil pump off, you need to remove all 3 of those gears that i mentioned.
__________________

1995 Honda Prelude SE Turbo; 250whp, 275wtq @ 10psi Soldddd!!!

2000 Acura TL; DD
2005 Stage2.5+ Subaru WRB STi : RzKar!
Ivey Tuned - Advan - Cobb - Rallispec - CP - Perrin - ACT - KillerB - Carillo - TurboXS - Defi - Innovate - Walbro - DeatschWerks - Feal - H&R - Alpine - Infiniti - Curt

2001 Kawasaki STX1100 D.I. - Sold!
2007 Sea-Doo RXT 215; ET 127 +3 S/C impeller, DIY 3" intake, DIY resonator delete/free flow exhaust, DIY oil catch can, Rule 500gph bilge pump


Quote:
Originally Posted by Brash View Post
But you need that scoop on the hood. Is it true that they're big enough to fit your lunch box and all your camera gear in it?
Reply With Quote
  #6 (permalink)  
Old 02-22-2013, 11:29 AM
twokexlv6coupe's Avatar
little green ghouls, buddy!!
Photobucket
 
Join Date: Apr 2006
Location: kitten mittens
Posts: 17,844
iTrader: (9)
twokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond reputetwokexlv6coupe has a reputation beyond repute
Send a message via AIM to twokexlv6coupe
Re: h22 crank removal

Try taking the woodruff key out first. Either gently tap it to loosen it up, than pull it out with some pliers with duct tape around the teeth to prevent chewing it up.

Once the key is removed, see if you can rotate the gear around the crank to break it free of rust/corrosion, than it should simply slide right off.
__________________

1995 Honda Prelude SE Turbo; 250whp, 275wtq @ 10psi Soldddd!!!

2000 Acura TL; DD
2005 Stage2.5+ Subaru WRB STi : RzKar!
Ivey Tuned - Advan - Cobb - Rallispec - CP - Perrin - ACT - KillerB - Carillo - TurboXS - Defi - Innovate - Walbro - DeatschWerks - Feal - H&R - Alpine - Infiniti - Curt

2001 Kawasaki STX1100 D.I. - Sold!
2007 Sea-Doo RXT 215; ET 127 +3 S/C impeller, DIY 3" intake, DIY resonator delete/free flow exhaust, DIY oil catch can, Rule 500gph bilge pump


Quote:
Originally Posted by Brash View Post
But you need that scoop on the hood. Is it true that they're big enough to fit your lunch box and all your camera gear in it?
Reply With Quote
  #7 (permalink)  
Old 02-22-2013, 10:05 PM
natt2000's Avatar
Bronze Member
 
Join Date: Mar 2011
Posts: 221
iTrader: (0)
natt2000 will become famous soon enough
Re: h22 crank removal

gear puller? i used a 3 jaw on mine. only way i can ever get it off.
Reply With Quote
  #8 (permalink)  
Old 02-28-2013, 06:02 PM
h23a1ftw's Avatar
Bronze Member
 
Join Date: Apr 2010
Location: Largo, florida
Posts: 185
iTrader: (1)
h23a1ftw is on a distinguished road
Send a message via Skype™ to h23a1ftw
Re: h22 crank removal

Ok update for anyone who needs this later on, i used heat and it came right off with a little prying. Idk any other way but thats the only way that worked for me. Thanks to all those who helped!
__________________

'92 Prelude Si: H22a1 swap w/spun bearings - parts car :)
'89 240sx: ka24e - totaled
'95 VW Golf FRI VR6 - sold
'81 Chevy K10 Scottsdale: 350 beast - sold
'89 CRX HF: 1.5l SOHC - totaled
'94 Prelude Si: H23a1 - DD
'94Prelude Si: H23a1 - Overheated & sold
'88 GMC 1500: Straight six - Sold
'92 Prelude: F22 - Sold
'89 CRX: IDK - Totaled
'85 F-150: 302, cam, exhaust, etc. - Sold
Reply With Quote
  #9 (permalink)  
Old 02-05-2016, 02:36 AM
I'm New
 
Join Date: Oct 2014
Posts: 12
iTrader: (0)
lazyluder is on a distinguished road
Re: h22 crank removal

Quote:
Originally Posted by twokexlv6coupe View Post
Try taking the woodruff key out first. Either gently tap it to loosen it up, than pull it out with some pliers with duct tape around the teeth to prevent chewing it up.

Once the key is removed, see if you can rotate the gear around the crank to break it free of rust/corrosion, than it should simply slide right off.
Waking up an old post sorry guys, my crank pulley bolt came loose both belts came off and drove it home 2 miles away, anyway ordered new bolt pulley and woodruff key just a have a small question will the woodruff key come out if the only thing I removed was the crank pulley?
if so what are some suggestions to remove it i saw someone said electrical tape some pliers yank that sucker out of there.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
H23 crank removal naj3000 4th Gen Honda Prelude 11 10-19-2012 06:01 PM
Need assitance for DIY CPS ( crank position sensor removal sb4j 4th Gen Honda Prelude 3 05-23-2010 01:17 PM


All times are GMT -4. The time now is 09:54 PM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors


Copyright © 2006-2009 PreludeZone.com All Rights Reserved.