So I got an alignment and long story short, I have these items.

everything except my camber, which couldn't be adjusted because i didn't have the camber kit then, was properly adjusted.
front:left camber = -1.3
front:right camber = -1.1
rear:left = -2.2
rear:right = -2.1

Now that I have my specs, i also have two shocks and two coilovers for the back and a camber kit for all 4 wheels. What should I do and go about install all these? I currently have coilovers in the back, but are crappy ones. the front has the nice coilovers already. how is camber adjusted to specific degrees with the kit? also what are some of the things in the pics?

my ride is lowered by a lot, thats why my camber is so off and I got the camber kit

the shocks:


coilovers, taken apart:


camber kit and whats the two other objects??:


random washers n stuff that came with coilovers/camber kit?


and the instructions for the shocks, it included all these bolts n washers n crap. But it only came with two nuts. Are those already on my current shocks?

It will be adjusted much in the same way as they are adjusted from the factory, unless you have the ball joint type.

__________________