Where you hide your power? Help!

[thomas97]

Okay, im no idiot, i even have the amp all working, got one of those great amp install kits and she works, but i ended up running the power cord from the battery through the pass. fender and then under the little thing in the door,

i know im not the only one with an amp so let me hear how you guys hid it,

i couldn't find a hole in the fire wall for anything :redface:

Help help help help! i nearly ripped my hair out with frustration today :mad:

[2.2Lude]

check behind your fuse box for a hole in the firewall i know thats the way mine was run, but then again the previous owner had done it and i have a 4th gen

[twokexlv6coupe]

check behind your fuse box for a hole in the firewall i know thats the way mine was run, but then again the previous owner had done it and i have a 4th gen



ding ding ding. go read my battery relocation tutorial, it shows exactly how i ran mine.

[Preludeshalyn]

i drilled a hole in the area of the pedals through the fire wall then ran under the carpen along the drivers side door, i ran the signal wires under the carpent on the passanger side to alleviate some interference.

[thomas97]

preludeshalyn,
can you take a picture of the hole you drilled?

nick,
is the hole in the same area on a 5th gen?

[nevrdun]

hey thomas. you definately dont want to run it through your door jamb. That is BAD news. There is a reasonably difficult place to drill a hole on the passenger's side but much safer. I would take and post a pic but my car's at work.

[Brash22]

I found a grommet that came out just by the driver's side footwell. Easy.