Dwend
01-19-2008, 11:25 AM
4/5th gen Prelude/Honda magnetic logos
If your Prelude is a weekend warrior. Add a Prelude logo so people don't confuse your prelude with a JDM Integra ever again.
What you need:
12 x 24 magnetic sheet (found at most craft stores)
Scissors
Computer & printer
Spray paint (optional)
Modeling paint
Double sided tape
1) Down load 4th gen LOGO (http://aycu13.webshots.com/image/42492/2003153653608037796_rs.jpg) to your computer. 5th Gen LOGO (http://aycu07.webshots.com/image/47166/2005185169657333853_rs.jpg)
4th gen download (http://www.oakvalleyswimming.com/new%20folder/prelude%20logo.pdf) / 5th gen download (http://www.oakvalleyswimming.com/new%20folder/prelude97-01%20logo.pdf) here if you want a 19 ½ inch 4/5th gen logos and skip to step 3.
2) Download Rasterbater (http://homokaasu.org/rasterbator/) to rasterize the image to any size you like. For best results use dot sizes of 1-3 mm.
3) File should open in Adobe Reader where you can print the logo. Just ignore the small dots they wont be printed. Should print like this.
http://aycu10.webshots.com/image/39209/2005819340905354357_rs.jpg
4) Tape the pages together
5) Place the logo on the magnetic sheet so you can size the amount of magnet you’ll use.
6) Cut the magnetic sheet to size.
http://aycu12.webshots.com/image/41251/2005887597246442964_rs.jpg
7) Now use the double sided tape to tape down the logo to the magnetic sheet so it doesn’t move around as you cut.
http://aycu40.webshots.com/image/39319/2005882994516975803_rs.jpg
8) Now cut around the letters leaving the loops and some area in the center to paint later. Don’t cut the space between the P and r.
http://aycu33.webshots.com/image/41752/2005868104723836677_rs.jpg
9) Carefully pull the paper off the magnet not to rip the paper.
http://aycu06.webshots.com/image/40365/2005892378886683192_rs.jpg
10) If you want to change the color of the logo. Use the spray to paint the whole thing.
11) While the paper is off the magnet cut the white area off the paper.
12) Place the paper back on the dry magnet. Using the double sided tape.
13) With a pen/sharpie outline the area that will need to be painted. Such as the loops and center area that was left for strength.
http://aycu06.webshots.com/image/40365/2005882278924620024_rs.jpg
14) Now carefully paint with the modeling paint the areas you just marked. I used black, but you can use any color that matches your car (if your car is red use red paint).
http://aycu35.webshots.com/image/39794/2005852905368895986_rs.jpg
15) Let dry
16) Slap it on the car and see how it looks.
Final:
http://aycu16.webshots.com/image/45215/2004145702838716855_rs.jpg
If you want to add the Honda Logo download the font here (http://www.dafont.com/hondafont.font).
1) Print the letters any size you want
2) Use double sided tape and tape to magnetic sheet
3) Cut around the letters (you can cut the center of the O)
4) Take the paper and tape off
5) With spray paint, paint with any color you wish.
Need a 3rg gen logo, PM me
If your Prelude is a weekend warrior. Add a Prelude logo so people don't confuse your prelude with a JDM Integra ever again.
What you need:
12 x 24 magnetic sheet (found at most craft stores)
Scissors
Computer & printer
Spray paint (optional)
Modeling paint
Double sided tape
1) Down load 4th gen LOGO (http://aycu13.webshots.com/image/42492/2003153653608037796_rs.jpg) to your computer. 5th Gen LOGO (http://aycu07.webshots.com/image/47166/2005185169657333853_rs.jpg)
4th gen download (http://www.oakvalleyswimming.com/new%20folder/prelude%20logo.pdf) / 5th gen download (http://www.oakvalleyswimming.com/new%20folder/prelude97-01%20logo.pdf) here if you want a 19 ½ inch 4/5th gen logos and skip to step 3.
2) Download Rasterbater (http://homokaasu.org/rasterbator/) to rasterize the image to any size you like. For best results use dot sizes of 1-3 mm.
3) File should open in Adobe Reader where you can print the logo. Just ignore the small dots they wont be printed. Should print like this.
http://aycu10.webshots.com/image/39209/2005819340905354357_rs.jpg
4) Tape the pages together
5) Place the logo on the magnetic sheet so you can size the amount of magnet you’ll use.
6) Cut the magnetic sheet to size.
http://aycu12.webshots.com/image/41251/2005887597246442964_rs.jpg
7) Now use the double sided tape to tape down the logo to the magnetic sheet so it doesn’t move around as you cut.
http://aycu40.webshots.com/image/39319/2005882994516975803_rs.jpg
8) Now cut around the letters leaving the loops and some area in the center to paint later. Don’t cut the space between the P and r.
http://aycu33.webshots.com/image/41752/2005868104723836677_rs.jpg
9) Carefully pull the paper off the magnet not to rip the paper.
http://aycu06.webshots.com/image/40365/2005892378886683192_rs.jpg
10) If you want to change the color of the logo. Use the spray to paint the whole thing.
11) While the paper is off the magnet cut the white area off the paper.
12) Place the paper back on the dry magnet. Using the double sided tape.
13) With a pen/sharpie outline the area that will need to be painted. Such as the loops and center area that was left for strength.
http://aycu06.webshots.com/image/40365/2005882278924620024_rs.jpg
14) Now carefully paint with the modeling paint the areas you just marked. I used black, but you can use any color that matches your car (if your car is red use red paint).
http://aycu35.webshots.com/image/39794/2005852905368895986_rs.jpg
15) Let dry
16) Slap it on the car and see how it looks.
Final:
http://aycu16.webshots.com/image/45215/2004145702838716855_rs.jpg
If you want to add the Honda Logo download the font here (http://www.dafont.com/hondafont.font).
1) Print the letters any size you want
2) Use double sided tape and tape to magnetic sheet
3) Cut around the letters (you can cut the center of the O)
4) Take the paper and tape off
5) With spray paint, paint with any color you wish.
Need a 3rg gen logo, PM me