4th Gen. Accord Coupe Sides on a 4th Gen. Lude

[mizlude]

to put the accord sides on you must first cut the front of the skirt about 4.5 inches down ( maybe less). then take all of the with slider clips off the lude but the 2nd 3rd and 4th ones ( come from the rear tire ) then slide it on ( make sure it is snug ). then mark the back side of it to be cut. Oh and you also need to trim alot of the part of the side skirt that goes under the car ( just eye it ). now jack the car up ( it should be already ) and use a drill and make the holes for the clips that hold the skirt under the car ( its easyer this was trust me ). ok now to get the front of the skirt to fit alot more snug at the top buy the fender, drill a small hole in the fender ( were the top of the skirt meets it and it doesnt need to be big). slap the skirt back on mark the hole from inside the fender and make a smaller hole so you can just put a skrew in it plastic skirt then put the mud flap on and bam accord sides on a lude

man I hope that is readable ( i did wright this at 440 am )

I will edit this late and make it more like a list and add some pics.

[2.2Lude]

hey mike are you still going to add pic's?

[DJ Prelude]

what do u use to cut down the lip?

[PepsiOne]

I would like to see some pics...nice writeup though...

[mizlude]

what do u use to cut down the lip?

I used tin snips (is used to hang siding so I have mad skillz) yeah I can put up pics when I redo mine (im molding the ends on and painting them body color)

[thomas97]

nnnoooooooobbbb put up pics!!

[mizlude]

nnnoooooooobbbb put up pics!!

Noob I did the swap with no help

[PreludeBoy95']

how do u intend to mold 'em?

[mizlude]

Ok you know how the ends are open because you have to cut them? well Im going to use kitty hair (no not cat hair) to put the ends on when I get around to it lol.

[PreludeBoy95']

Ok you know how the ends are open because you have to cut them? well Im going to use kitty hair (no not cat hair) to put the ends on when I get around to it lol.

oh ok i gotcha

[el_cuco]

Any pics of the finished product? I myself want to try to use 5th gen sideskirts due to that little flare they have towards the end.

[starbai]

i know this is an old thread but if anyone could put the pics up i'd really appreciate it

[Si Speed]

i know this is an old thread but if anyone could put the pics up i'd really appreciate it

X2 .

[starbai]

does anyone know if the accord sides come down further than the prelude sides? like what the size of em' are?