How to find the fog light switch harness in the 92-93 si

[mizlude]

1st pop off you driver side tweeter cover.

2nd after doing that you'll see a larger all raped in tape harness like the one I'm holding in the pic

http://i87.photobucket.com/albums/k150/mizlude/SSPX0204.jpg

3rd take two or three fingers and reach around the left side of that harness. You should feel a small group of lose wires( like 5 or 6). grab them and yank, they should (when they start coming out) look like this

http://i87.photobucket.com/albums/k150/mizlude/SSPX0207.jpg

In the end if you grab the right ones you should come out with this

http://i87.photobucket.com/albums/k150/mizlude/SSPX0210.jpg

I hope this helps a lot people out.

[twokexlv6coupe]

haha, i can't believe theres a tutorial just for this

hope it helps someone

[mizlude]

Hey I'm just trying to help out the newbs and with all the advice I got on how to find it(lack there of) I thought I would through this on here

[Prelude13]

Hey, it's appreciated, thanks Mizlude!

Added to the resource guide.

[2.2Lude]

i can't find that thing i've spend about 15mins lookin for it ughhh

[mizlude]

i can't find that thing i've spend about 15mins lookin for it ughhh

its back there deep man just keep digging

[starbai]

is the tweeter switch the proper one to go into this harness??

theres a few different switches out there, which is correct, most plug and play/easiest one out there?

it looks like the one in this picture wouldn't work for example....
http://www.freewebs.com/cww180/BA83.jpg

http://i24.ebayimg.com/02/i/000/ce/1f/76c3_1.JPG

[mizlude]

No the switches you have are for the 94-96 cars. Are those the fogs you bought?

[starbai]

Nope I just found that pic to show the switches that I was looking at.


Anyone know where I can find the 92-93 switch? I'll be watching ebay.


i'm considering just using just any old switch from autozone, but i gotta figure out which wires in that harness i need to tap into.

I gotta look at the service manual for some diagrams.

[mizlude]

call me I'll tell you how.

[starbai]

alright will do tomorrow when i open it up again and get a nicer switch.

[2.2Lude]

if you want that rare switch i've got one:biggrin:, but your going to have to cough up a little bit for it:rolleyes:, you can ask mike he knows how much they go for. PM if you interested.

Sorry for the thread jacking Mike. btw you know how much i want my lude to look like yours.:eating:

[starbai]

I'm not all JDM OEM crazy lol. so long as it looks clean and is functional I'm interested so why dont you PM me with what you're looking to get for the switch and I'll see if its in my budget.

If not, its off to Pep Boys I go. (and mike can help me wire it up ;) )

[mizlude]

if you want that rare switch i've got one:biggrin:, but your going to have to cough up a little bit for it:rolleyes:, you can ask mike he knows how much they go for. PM if you interested.

Sorry for the thread jacking Mike. btw you know how much i want my lude to look like yours.:eating:

well park your car out side for 16 years to fade the paint and let the pass side rear .25 rust out then your car will look like mine lol.

[2.2Lude]

well i better get started then lol

[starbai]

Ok, so

The proceedure here just to clarify everything in terms of wiring.

1. Plug the fog lights in up front.
2. Plug a relay into the proper spot in the harness under the dash.
3. Connect a switch to the harness up by the left tweeter.
4. Hit the headlights, then the switch and voila!

Ok so, that Harness for the switch, has the following 6 wires.

Red/Yellow
Orange
Red/Green
Black
Red
Red/Black


Your average Autozone switch has 3 prongs.

Obviously Ground goes to black,

What other two colors from this harness goes into this switch in which spot?

Miz... i know you said to call you and I appreciate it but bro I get outta work so late some times I feel real bad calling that late so for that reason plus i'm sure someone else around here could use the information, which other two wires do I need to tap into my switch to make it work?