::: 98vtec ::: 1998 H22a

[98vtec]

http://i23.photobucket.com/albums/b376/98vtec/DSC05059_2.jpg

http://i23.photobucket.com/albums/b376/98vtec/DSC05047_2.jpg

http://i23.photobucket.com/albums/b376/98vtec/DSC05041_2email.jpg

http://i23.photobucket.com/albums/b376/98vtec/DSC05043_2.jpg

http://i23.photobucket.com/albums/b376/98vtec/DSC04941.jpg

http://i23.photobucket.com/albums/b376/98vtec/DSC04921.jpg


MODS (if i can remember them all, lol):

Engine:
Darton H23 block
balanced Wiseco pistons
balanced Crower rods
balanced and micropolished f22 crank
Mains align honed
Kaizenspeed Balance Shaft eliminator kit
Rosko Racing balancer shaft tensioner delete spacer
Cometic .051" headgasket
AEBS headstuds
EuroR intake manifold (prepared by rosko)
Rosko Racing Fuel rail (specifically made for the RDX injectors)
410cc Acura RDX injectors
Stock JDM h22a head
B&R Fittings Crankcase ventilation valve cover setup
B&R Fittings External oil feed to head for additional lubrication
H23 manual tensioner conversion
AEM cold air intake with BPi flowstack
S2000 throttle body
Fast idle delete (coolant lines looped)
RMF custom header
Carsound highflow cat
Custom 3" exhaust
Fidanza 12lbs flywheel
Action 2ks kevlar clutch
NGK plugs and wires
s2000 oil filter
Torco Sr-1 5w30 Synthetic oil
Torco Zinc Additive (ZEP)
JDM Type S valve cover
Removed Power Steering, AC, Cruise Control, EVAP, EGR, rear and driver side seat belts...etc
Summit Racing battery relocation


Tuning:
p28 with eCtune
Moates Ostrich
Moates Hulog
Innovate LC1 wideband 02

Suspension/Tires:
Tein Type HA coilovers with pillowball mounts
BFgoodrich KDW2 225/45/16
16x7.5 Kosei K1
Mikey Thompson 22x8x15 Drag slicks
15x7 Kosei K1 drag wheels
SPC front camber kit
Energy suspension cross member and engine mount bushings

Interior:
NRG race bucket
Wedge Engineering seat rail
NOPI slider
Simpson 5pt racing harness
Personal Grinta 330mm steering wheel
NRG quick release
HKB hub
Spoon duracon shift knob
4th gen 4bidden short shifter
Apexi Oil pressure gauge
Silver gauge bezels
Gutted rear portion

Exterior:
Custom Metallic Red paint (MR155.50)
VIS oem CF hood
JDM fogs
painted sideskirts
JDM hoodlift y0!
Stock wheels painted time attack style
15% window tint
cleared rear turn signals
Black headlight trim

[Drew]

lookin good blake. but uh, where's the mods list???

[Si Speed]

lookin good blake. but uh, where's the mods list???

Yes, you need a to put a mod list man.
http://www.preludezone.com/showthread.php?t=1325

I love the back of the car with no badges or lettering. Clean. Funky header too. I don't really see how that kind of design would put too many gains unless you had a turbie between the header and dowpipe.

[98vtec]

added a mod list :)

[ogsmakdade]

clean. me likey.

[Prelude13]

I've always admired this Prelude.
Good sht Blake, impressive bb6.

...and you know what the deal is: RED LUDES, we own everyone. :yo:

[98vtec]

thanks guys.

[Si Speed]

I coulda got a red 5g but red cars are cop magnets, at least around here. The black 5g came with a yellow ribbon magnet though. :P

/thread jacking

[rheakpl]

niceee!
very sleek outside, clean/empty engine bay.. =D

was your car originally black??
inside your engine bay, its black.

[98vtec]

i painted it black when the old motor came out the the jdm motor was dropped in.

i wouldnt mind getting another set of wheels, but i love my stockies so much. If they made the stock wheels in 16x8 i would be in heaven.

[hotrod]

I've always admired this Prelude.
x2. awesome job. i gotta do a conversion to 5g stockies. i'm starting to get tired of my aftermarket 17s. that and the freakin header i've been saying i need to get for who knows how long now. :redface: i like the first pic... unconquered.

[Brash22]

Love it mate. Absolutly love it. All I'd do is put that centre console back in. But that's extra weight, and probably not acceptable.

[twokexlv6coupe]

i like the first pic... unconquered.


x2. BADASSSSS!!!

[98vtec]

x2. awesome job. i gotta do a conversion to 5g stockies. i'm starting to get tired of my aftermarket 17s. that and the freakin header i've been saying i need to get for who knows how long now. :redface: i like the first pic... unconquered.

you know, its really weird. Everytime i have tried to buy wheels, something always happens. Whether it be i have to spend the money elsewhere, someone else gets the same wheels.......messed up orders...whatever. It's a sign. Everyone wants to get aftermarket wheels and i want aftermarket stockies, lol.

[Sooner07]

looks great

[98vtec]

ok well sometime i'm going to have to buy a new camera so you guys can see the update. 16x7.5 Kosei K1's with 225/45 Advan AO48 tires

[Drew]

the ones you had when we all went to the drag strip???

[98vtec]

the ones you had when we all went to the drag strip???

those are the slicks......

http://photos-a.ak.facebook.com/photos-ak-sf2p/v110/76/122/201400718/n201400718_31360988_8986.jpg


I'm talking about the wheels i was carrying around in my dads truck.

[Prelude13]

pics or bannage.


haha, how you recovering Blake?
You broke some foot bone if i recall correctly...

[98vtec]

its better, still have problems with it now and again.

[97predator]

vis oem cf hood???? my POS cf hood fits better then that. "jdm hood lift"...your kidding right? other then that not bad.

[98vtec]

vis oem cf hood???? my POS cf hood fits better then that. "jdm hood lift"...your kidding right? other then that not bad.

whats wrong with the fitment?

the hood lift decreased engine bay temps and lifted the hood away from the header a little bit. Serves a purpose for me. function > form

[Si Speed]

I had that idea... but I think I'm going to wait considering all my stuff is stock. Did you do an actual temperature test to see how much it helped?

[98vtec]

I had that idea... but I think I'm going to wait considering all my stuff is stock. Did you do an actual temperature test to see how much it helped?

i am able to datalog intake air temperatures....yes

[Si Speed]

i am able to datalog intake air temperatures....yes

Care to share what you got?

[wite2nr98]

wow i usually dont like red cars but that is the cleanest one i have ever seen. much better than my neighbor with a red 5G and white rims.

[waltrupp1988]

tight lude..... love the rims

[98vtec]

these are the wheels

http://home.cfl.rr.com/sleepyfish/IMG_1162.JPG

[ogsmakdade]

nice! now put them on the car.

[98vtec]

they are already on the car, just dont have a camera anymore.

[Si Speed]

Just wondering, why'd you take off the front lip, spoiler, and lamin-x on the fogs. It was dope when you had all that, or are you trying to make it more of a strict race car?

[94preludeguy]

Blake how much does your car weigh?

[Drew]

Just wondering, why'd you take off the front lip, spoiler, and lamin-x on the fogs. It was dope when you had all that, or are you trying to make it more of a strict race car? weight reduction... DUH!! :rolleyes:

[98vtec]

Just wondering, why'd you take off the front lip, spoiler, and lamin-x on the fogs. It was dope when you had all that, or are you trying to make it more of a strict race car?

change of style, didnt like where the car was going. I like my own sense of style and i felt like i was following. plus the front lip scraped everywhere.

[98vtec]

Blake how much does your car weigh?

i havent weighed it but i would guess low 2800 maybe high 2700 without me in it

[Si Speed]

change of style, didnt like where the car was going. I like my own sense of style and i felt like i was following. plus the front lip scraped everywhere.

I don't have a lip and I know what you're talking about. Take a look at my under splash guard. :rolleyes:

[98vtec]

i dunno if i would even be able to put the slicks on without scraping the lip on the ground, lol. My slicks drop the front of the car alot lower.

[98vtec]

http://img.photobucket.com/albums/v248/geoff1917/7-1.jpg

[Si Speed]

Did you paint the stock sides or buy red SH side?

[ogsmakdade]

they look like painted stock sides to me. that's how I'm goin, unless I leave em black.

[98vtec]

yep stock painted

[91Si4WS]

your Spoon badge came off your spoon shift knob too?? mine came off too i thought i was the only one that had that problem because my friend has one in his civic and he's had his longer than i had mine and his hasn't came off...

[OnPointH22]

are you gona piece the center consol back or are you running it like that.. the track look

[98vtec]

are you gona piece the center consol back or are you running it like that.. the track look

i put it back in not too long ago.

[ogsmakdade]

I need to talk to you about some tuning when u get a chance. I gotta get this pig street legal, if only for the inspection process.

[Ludasaurus]

Ahh yes, the fast N/A 5g.

[Prelude13]

Any update on your repaint Blake? last i read you said something of a Porsche red? -awesome-

[SystemA7X]

one of the best interiors i have seen
good job

[R8GYY]

thats a nice 5th gen..some drastic weight reductions
..keep it up

[sfields]

gotta love Blake's lude...

[gr8balla465]

lookin real good, like how da engine bay looks

[98vtec]

this is the updates:

the beginning:
http://i23.photobucket.com/albums/b376/98vtec/DSC05253.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05256.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05257.jpg

starting harness extensions and tuck
http://i23.photobucket.com/albums/b376/98vtec/DSC05310.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05305.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05264.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05274.jpg

http://i23.photobucket.com/albums/b376/98vtec/DSC05317.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05315.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05322.jpg
http://i23.photobucket.com/albums/b376/98vtec/DSC05323.jpg

car goes to the body shop on the 30th

[Brash22]

One word mate. Three letter, two consanants, one vowel.

WOW

I can't wait to see where this goes!

[98vtec]

just waiting on the final parts (cam seals, oil cooler gasket and oil pan gasket) to come in and everything can go back together. Those parts are scheduled to arrive on the 28th.....cutting it close with meeting my body shop appointment. But im fairly confident that as long as the parts come in on the 28th that i can have it running, broken in, and street tuned by that time.

[Si Speed]

What's up with "Zoltan?" Lol
Are you still painting it Porsche red or whatever or will it be stock red?

[98vtec]

i went to their paint room and picked the color that i wanted. Its MR155.50 - Metallic red. A little darker than what i have right now, just in metallic.

Zoltan is an inside joke at the shop, lol. I happen to think it was hilarious.

[Si Speed]

I laughed myself but it probably wasn't as funny to me as it would be if I knew the joke. For some reason it makes me think of Ultra Lord from Jimmy Neutron. Are you painting the door jams and stuff too? I'm ready to see it in action so I know what I'm up against when I get done. :biggrin:

[98vtec]

the engine is far from being done. just kinda sucks that i have to run stock cams. It's gonna be an acceleration monster. Especially in the lower RPM.

this is all hoping that the engine DOES run, lol

[Si Speed]

What happened with the blue Lude you were supposed to get?
I thought you had some pro series that were going in? Bummer. I need to see fresh stuff from you or TEL to keep me motivated, haha.
For your sake, I hope it does run and you don't have the same fate Brittoknee had with her H23 V-Tak.

[98vtec]

What happened with the blue Lude you were supposed to get?
I thought you had some pro series that were going in? Bummer. I need to see fresh stuff from you or TEL to keep me motivated, haha.
For your sake, I hope it does run and you don't have the same fate Brittoknee had with her H23 V-Tak.

i havent talk to him since then and he hasnt been online since the day we talked.

it'll be done by the 30th which i wont have it for prolly over a week. Then i get to have fun with it.

[sfields]

damn Blake! Thats some work right there! Keep it up, good luck meeting that deadline!

[98vtec]

damn Blake! Thats some work right there! Keep it up, good luck meeting that deadline!

yea tell me about it. I took the past two days off because i have been working on it non stop. It wouldnt be so bad if i was doing it for a customer and i was making money off it, but im not.....lol

[Si Speed]

So how bout an update on that monstrous engine build? :wink:

[dubbs.]

Wow, kickass engine build. RMF FTW.

[98vtec]

new engine harness will be here on friday.

[Si Speed]

Bout time man. How long have you been waiting? When can we expect to see some videos or time slips? Think you'll get into the 12's with the current set-up on slicks?

[PreludeBoy95']

oh sweet lude..goes nice with the "UNCONQUERED" background...oh yeah haha

[98vtec]

Bout time man. How long have you been waiting? When can we expect to see some videos or time slips? Think you'll get into the 12's with the current set-up on slicks?

i havent driven my car in about 3 months. Its been down since just before christmas, iirc.

its gonna be awhile til i get to the track and there isnt a chance in hell it'll go 12's. Not with a stock head. If i am comfortable with how the engine breaks in and after i do some checkups, i'll be taking it to the dyno the day after it runs.

[Si Speed]

updates on her?

[98vtec]

i get her back late this week. Went up there yesterday and they were sending it in to get painted that day. I was told that it would be done definitely by friday but they are shooting for late thursday.

heres the new exhaust:
http://i78.photobucket.com/albums/j85/mykizism/04-19-08%20BBmoto%20Exhaust/DSC05691-ed.jpg

Also sold my neptune unit and purchased eCtune to give it a try.

got a few other things that are going to be getting done, but i'll keep it to myself until im ready.

[Brash22]

Don't forget to let us know how you go mate. I'm watching with excitement!

[Si Speed]

So you'll be running catless eh?
I can't wait for some vids. WHat shade of red did you finally decide on?

[98vtec]

So you'll be running catless eh?
I can't wait for some vids. WHat shade of red did you finally decide on?

not catless. it will be welded onto the cat.

http://i78.photobucket.com/albums/j85/mykizism/04-19-08%20BBmoto%20Exhaust/DSC05740-ed.jpg
http://i78.photobucket.com/albums/j85/mykizism/04-19-08%20BBmoto%20Exhaust/DSC05733-ed.jpg
http://i78.photobucket.com/albums/j85/mykizism/04-19-08%20BBmoto%20Exhaust/DSC05726-ed.jpg

the shade of red i picked out is kinda like this
http://i78.photobucket.com/albums/j85/mykizism/02-20-08%20Boosti/DSC04617-ed.jpg

[Si Speed]

So you're not running the exhaust out the back? Just the turn-down? That'll be interesting.

[98vtec]

So you're not running the exhaust out the back? Just the turn-down? That'll be interesting.

:wink: yes sir.

[ImPorTuNeRdJ]

that example of shade red..yeah that evo is lowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww wwwwwwwwwwwwwwwwwwwwwwwww

anyway, i really cant wait to see this car keep us updated!

[98vtec]

its an STi, but yes the color is very sexy.

[ImPorTuNeRdJ]

damn i was close thoughh i had a feeling it was an sti lol

[Si Speed]

Good luck.
I hope you don't have to go over many speed bumps. How much are you lowered?

[BadMofo]

I saw the exhaust a couple weeks back on one of the other forums (can't remember which one now) and saw that you were catchin a lot of flack for doing the turn down exhaust right there under your fuel tank... did you decide to go with that heat plating or not? Can't wait ti see this project at it's completion... sick man.

Oh and that is some very high quality tig welding if I do say so myself... I like it a lot bro.

[98vtec]

Good luck.
I hope you don't have to go over many speed bumps. How much are you lowered?

myk made the exhaust so it would be tucked inside the exhaust housing. It shouldnt hang low at all.

I'm not slammed by any means. I got out of that form > function aspect a long time ago.

[98vtec]

I saw the exhaust a couple weeks back on one of the other forums (can't remember which one now) and saw that you were catchin a lot of flack for doing the turn down exhaust right there under your fuel tank... did you decide to go with that heat plating or not? Can't wait ti see this project at it's completion... sick man.

Oh and that is some very high quality tig welding if I do say so myself... I like it a lot bro.

eh, im not really worried about what people think. It's my car.

Yes, i bought that heat plating. 24x24in sheet to cover the whole bottom of the gas tank.

About the welding...he will only get better. ;) Exhaust goes on saturday night by my other welder.

[BadMofo]

eh, im not really worried about what people think. It's my car.

Yes, i bought that heat plating. 24x24in sheet to cover the whole bottom of the gas tank.

About the welding...he will only get better. ;) Exhaust goes on saturday night by my other welder.

I welded for about 4 years out of high school... mostly MIG welding and Oxy/Propelyne brazing of copper and a little stainless. I got my start welding catalytic converters for Eastern Catalytic, and then I moved onto a company that made metal melting furnaces for foundries where I did mostly brazing... lots of copper work. I don't have a lot of experience with TIG welding, but I can tell you from experience that those are pretty good looking welds for someone who, as you say, "will only get better". You can tell him I said I like his work! =)

[98vtec]

have you seen the pictures of the downpipe/dumptube/full exhaust he made for his car?

[98vtec]

updated the mod list

[BadMofo]

have you seen the pictures of the downpipe/dumptube/full exhaust he made for his car?

Nah I haven't seen that, I'll have to check a little later.

[Prelude13]

...

I'm not slammed by any means. I got out of that form > function aspect a long time ago.

I most definetly agree with that.

It's looking good man, what 1/4 miles are you aiming for once this is all put together, back running?

[98vtec]

I most definetly agree with that.

It's looking good man, what 1/4 miles are you aiming for once this is all put together, back running?

on the setup it has now, mid 13's....maybe low if i can get it off the line.

[Brash22]

Quick question mate, have you played with the trans at all? I'm just curious as to whether or not you're still running a clutch shifted box. But then again I'm not sure if there's anything else available for Prelude...

[98vtec]

using the stock m2a4 transmission. LSD, Mfactory 4.64 final drive and gearspeed carbon coated synchros are in the future. I want to get it done all at one time so to say the least, it will be one of the last things done, lol. The LSD and FD will set me back about 1500 by themselves, lol, and i think the synchro set is 250.

[98vtec]

with flash to see metallichttp://i23.photobucket.com/albums/b376/98vtec/Picture001-1.jpg


no flash http://i23.photobucket.com/albums/b376/98vtec/Picture003-1.jpg

[Si Speed]

tease :tongue:

Still keeping the same rough looking hood?

Also, are they doing orange peel with the paint?
A guy told me yesterday that automakers are going back to doing that because there's more paint than water in it and over time, the paint settles and looks better. I'm kinda skeptical on that.

[98vtec]

orange peel with the paint? orange peel is bad....

yep, keeping the hood until i can afford another one. this one will likely get some BBQ grill paint to cover up the battle scars.

[Prelude13]

Damn thats a nice color indeed...


What's the name of that red, kinda looks like Brash's red ...

[98vtec]

once i get it in the sunlight, i think you will see the differences.

[Brash22]

Gorgeous colour, bit darker than mine. Can't wait to see a full pic.

[Si Speed]

orange peel with the paint? orange peel is bad....


That's what I said. :confused:
When I get it done, Imma just tell him no thanks and I'll take my chances without.

[ogsmakdade]

That's what I said. :confused:
When I get it done, Imma just tell him no thanks and I'll take my chances without.

find a new painter, that guy is a moron and is giving you excuses for his shoddy work.


that paint color looks great blake, can't wait to see it finished.

[Si Speed]

Well, he said he'd do it the other way if I wanted.
I've seen a lot of his work, and a lot of that was done several years ago and still holding strong.
The only alternatives are the guy who pained my 4th gen and missed clear coating several places and fixing many dents for the same price, or a guy who does better work than the factory and also charges $3000+ for just a paint job.

[98vtec]

IMO, there are very few places that can beat a "factory" paint job.

[rheakpl]

ahh looking good blake..almosttt thereeee.
how bad is this hood again?
haha unless a good chunk of it is missing why not try and give it a nice light sanding and reclear coating for fun?

yea my lord i hate finding a good paint shop.
there are very few that do even close to factory jobs...
i got quoted around $10,000 from this outrageous, but awesomely reputable, lexus place......

[98vtec]

the hood is pretty bad, lol. They cover a good portion of the middle of the hood. And since my car was sitting for a while, the sun put a beating on the clear coat so thats beginning to come off. Its likely going to get the BBQ grill paint treatment on the inside and outside :-P

[Si Speed]

This guy takes every thing off and paints it one by one. If it gets even the slightest knick before you get the car back, he takes that piece back off and completely re-paints it.
My friend's dad has a 01 Camaro SS that he got painted red with black stripes. That paint job was $9000 including extra coats of paint and clear coat. It's really nice but I don't see the point in dropping that much money on something like paint that's going to get knicks and scratches anyway the first time you go somewhere.
Just curious, are you getting another OEM style hood or some kind of vented one?

[98vtec]

finally got the courage to run into vtec. Such a nice sound, lol. I havent heard that sound in 6-7 months. It's not that great up top (better than the stock motor) but the midrange is so much fun. I've got a pretty good street tune on it as of now. I need to get on the dyno so i can dial in the ignition timing.

I'm waiting on the engine to cool down some so i can change the crap autozone oil to the torco break in oil.

and i have no clue about the hood. As of now, it's not getting touched.

[Brash22]

That's great to hear mate.

[98vtec]

forgive the car being dirty:

http://i23.photobucket.com/albums/b376/98vtec/Prelude003.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude002.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude004.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude008.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude012.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude010.jpg

http://www.youtube.com/watch?v=Fkz_KaSIAa4

[Si Speed]

Looks sort of like Colin's color.
The wheels look good with it though.

She sounds like an angry Honda. :tongue:
Get that traction issue fixed though.

[PreludeBoy95']

whoa!!! freakin NIIICE...but i dont get how its a h23 vtec...can u explain

[Brash22]

H23 VTEC can be done quite easily, young grasshopper.

Blake that looks fantastic mate! And the sound is just mad. I want my car to sound like that :(

[ogsmakdade]

looks and sounds absolutely amazing. very impressive. great job blake

[98vtec]

whoa!!! freakin NIIICE...but i dont get how its a h23 vtec...can u explain

its an h23 block with an h22 head.

f22 crank (same as h23)
h23 rods

thanks for the comments. I'm still trying to get used to all the noise.

dyno is tomorrow :smile:

[98vtec]

http://i23.photobucket.com/albums/b376/98vtec/blakeH23.jpg

old 14.0 setup vs h23vtec
http://i23.photobucket.com/albums/b376/98vtec/h22avsh23vtec.jpg

http://i23.photobucket.com/albums/b376/98vtec/Prelude017.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude019.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude021.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude023.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude024.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude025.jpg
http://i23.photobucket.com/albums/b376/98vtec/Prelude027.jpg

http://i23.photobucket.com/albums/b376/98vtec/th_Prelude014.jpg (http://s23.photobucket.com/albums/b376/98vtec/?action=view&current=Prelude014.flv)
http://i23.photobucket.com/albums/b376/98vtec/th_Prelude033.jpg (http://s23.photobucket.com/albums/b376/98vtec/?action=view&current=Prelude033.flv)
http://i23.photobucket.com/albums/b376/98vtec/th_Prelude016.jpg (http://s23.photobucket.com/albums/b376/98vtec/?action=view&current=Prelude016.flv)

[ogsmakdade]

torque numbers are great. much better than mine in comparison to hp.

[Brash22]

That's incredible. I can't watch the videos at work, but look forward to watching them when I get home tonight!

[98vtec]

the in-car and fly-by videos are just off the street tune which you see has a lot less midrange power than the final run. the amount of midrange it has now is just outstanding. I granny shifted into 2nd gear and it spun the tires all the way to the point of shifting into 3rd.

I have an appointment with a k20 EG coming soon. Maybe i will get video for it.

[Prelude13]

Car is beautiful Blake...make us proud and beat that bubble.



...you are a Prelude ambassador.

[98vtec]

just doing what i can with what i got.

[Brash22]

New thread here --> http://www.preludezone.com/showthread.php?t=9757

:lock1: