Sooo I Effed Up... Again.

[TaylerP123]

I was removing my old wiring harness to attach the new one and I have now lost my interior lighting. My power locks. My dash board clock and who knows what else. I havn't attached the new harness yet but someone PLEASE tell me all this will turn back on once I reattach the baby blue wire to the wiring harness. PLEASE PLEASE PLEASE.

[twokexlv6coupe]

check fuses first and foremost.

[Prelude13]

Ah...

your power door locks? those aren't in the radio harness!!

What did you exactly cut Tayler?!

[TaylerP123]

Lol all I did was cut the wires that were holding the Alpine harness to the stock harness. Nothing else.

[TaylerP123]

I did unplug the white thing.

http://www.whyyouknowthis.com/prelude/23-2%20to%2023-202.PDF

Go to page 153. I unpluged that 16/20p thing and then cut off everything on the Alpine harness side that was connected to that white thing. And then I also had to cut off a baby blue wire that was connected to the Alpine harness that was connected to something I couldn't see because it was so deep in dash.

[Jcdrummr]

This happened to me once. Check ALL of your fuses very carefully. I ended up blowing four random fuses. I dont know how or why it happened, but replacing them all fixed everything

[ogsmakdade]

always disconnect the battery when altering electronics or wiring. You'll most likely blow a fuse if you don't.

[THE ONE]

Taylor check your fuses and get back at us bro...