Honda Prelude Forum
 
Go Back   Honda Prelude Forum > Tech-Talk > 5th Gen Honda Prelude

Thread Title
My 5th gen H22A build!

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 01-08-2011, 10:59 PM
BoscoLude86's Avatar
Not So New
 
Join Date: Jan 2011
Location: Lama Di Reno, Marzabotto, Italy
Posts: 35
iTrader: (0)
BoscoLude86 is on a distinguished road
My 5th gen H22A build!

Hello friends, i have few questions!
My engine now still running good!
In my build i have the std rods, with H22A stock rods how many Hp and Torque and how many Rpm's can i reach?
For example, 205 Whp and 200 lb ft can overstress my rods?? :-)
And many Rpm's?
8500 rpm running fine.... or at my risk??

Std rods seems good for a tuned engine, originally i had to use Brian Crower rods and Calico coatings main and rod bearings.
But i had to send back in the States for incorrect models ... that went on my h22a and time bound ... then i had to use the stock rods and King's main and rods bearings!
__________________
Bosco
Reply With Quote
  #2 (permalink)  
Old 01-13-2011, 04:19 PM
BoscoLude86's Avatar
Not So New
 
Join Date: Jan 2011
Location: Lama Di Reno, Marzabotto, Italy
Posts: 35
iTrader: (0)
BoscoLude86 is on a distinguished road
Re: My 5th gen H22A build!

Anyone? UP! :-)
__________________
Bosco
Reply With Quote
  #3 (permalink)  
Old 01-13-2011, 04:25 PM
havikprelude's Avatar
Platinum Member
 
Join Date: May 2010
Location: New Jersey
Posts: 1,477
iTrader: (0)
havikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond reputehavikprelude has a reputation beyond repute
Re: My 5th gen H22A build!

The rods are probably good for high rpm. Your springs...not so much.
__________________

Battery, Starter and Alternator Testing Procedures
Problems starting engine? | 5th gen resource

Quote:
Originally Posted by 1BadBB6 View Post
You're such a whiny little douche sometimes, but posts like these make me love you.
Reply With Quote
  #4 (permalink)  
Old 01-15-2011, 01:02 AM
BoscoLude86's Avatar
Not So New
 
Join Date: Jan 2011
Location: Lama Di Reno, Marzabotto, Italy
Posts: 35
iTrader: (0)
BoscoLude86 is on a distinguished road
Re: My 5th gen H22A build!

Quote:
Originally Posted by havikprelude View Post
The rods are probably good for high rpm. Your springs...not so much.
Thank you!
For the springs, now i use a Brian Crower kit BC0030 and a full valve set kit BC3030 and BC3030.
Is a set of Dual spring, titanium retainer and intake and exhaust stainless steel valves!
;-)
__________________
Bosco
Reply With Quote
  #5 (permalink)  
Old 01-15-2011, 11:47 AM
ogsmakdade's Avatar
functioning on impatience

Photobucket
 
Join Date: Jun 2006
Location: progression through unlearning
Posts: 13,916
iTrader: (6)
ogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond reputeogsmakdade has a reputation beyond repute
Send a message via AIM to ogsmakdade
Re: My 5th gen H22A build!

if you're unsure, stay around the stock rev limiter.
__________________

Quote:
Originally Posted by Sideswipe SI View Post
OGGS is a stuff a nerd in the locker type. He's only mellowed out 3 months ago.
Quote:
Originally Posted by wing8806 View Post
As it is, I wouldn't trust you washing my balls. And I typically let any trick hoe from OT do that.
Quote:
Originally Posted by bykfixer View Post
Reading this thread was like watching pulp fiction the first time...

Cool quote Utopia.
Reply With Quote
  #6 (permalink)  
Old 01-15-2011, 02:56 PM
BoscoLude86's Avatar
Not So New
 
Join Date: Jan 2011
Location: Lama Di Reno, Marzabotto, Italy
Posts: 35
iTrader: (0)
BoscoLude86 is on a distinguished road
Icon7 Re: My 5th gen H22A build!

Quote:
Originally Posted by ogsmakdade View Post
if you're unsure, stay around the stock rev limiter.
Yeah thanks!
Yesterday i have done a ECU remap, P28, with 3 different chip and maps!
Vtec pulled in at 4800 rpm and at 5000 rpm let's dance!
Rev limiter setted at 8220 rpm with Crome!

P.s. i have some problmes today with my Lude, i open a new thread in 5th Gen and i post the problem in my car... thanks!
__________________
Bosco
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
build b20a5? b21a1? or buy a h22a? s2kluda 3rd Gen Honda Prelude 12 04-21-2013 01:59 AM
93 jdm h22a n/a build 88h22a 4th Gen Honda Prelude 0 11-28-2010 09:38 PM
H22A Build williamgasdick 4th Gen Honda Prelude 4 04-23-2010 01:19 PM
F/I JDM H22A BUILD Trey Forced Induction 18 04-20-2010 03:44 PM


All times are GMT -4. The time now is 06:17 PM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors


Copyright © 2006-2009 PreludeZone.com All Rights Reserved.