Honda Prelude Forum
 
Go Back   Honda Prelude Forum > Tech-Talk > 4th Gen Honda Prelude

Thread Title
Alarm Wiring Help...

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-04-2013, 02:21 PM
I'm New
 
Join Date: Jun 2013
Posts: 4
iTrader: (0)
92LudeSI15 is on a distinguished road
Alarm Wiring Help...

Yes i have searched a bit, most of what i have done is off or LilMsPrelude's DIY, so maybe i am not using the right keywords however. I am working on installing a Viper 5204 Alarm/Keyless/Remote Start system. Below are the alarm wires i have placed teh car wire locations that i presume are correct. If anyone could just take a look at tell me if i have this correct. Also how on the Harness 2 wires are these really needed and if so which ones. Mind you the system comes with a Neutral Saftey switch and port into the brain of the alarm so i am sure i don't need the neurtal saftey input H2/2 wire...
I am sure i have the H1 harness correct minus the orange H1/6 wire and i have the remote start harness correct as that is fairly easy and i used LilMSPreludes DIY for that and most of the installation thus far, however i am still not getting a response from the alarm system let alone any chirps from the siren.


H1 Harness
H1/1 RED (+)12VDC CONSTANT INPUT 12v constant ignition
H1/2 BLACK (-) CHASSIS GROUND Good Chassis ground
H1/3 BROWN (+) SIREN OUTPUT Positive wire on siren
H1/4 WHITE/BROWN PARKING LIGHT ISOLATION WIRE - PIN 87a of onboard relay NOT USED
H1/5 WHITE PARKING LIGHT OUTPUT Black/Red wire 14 pin harness above driver kick panelH1/6 ORANGE (-) 500mA GROUND WHEN ARMED OUTPUT - ??? Starter Relay

H2 Harness, 24-pin connector
H2/1 PINK/WHITE (-) 200mA IGNITION/FLEX RELAY CONTROL OUTPUT ?
H2/2 BLACK/WHITE (-) NEUTRAL SAFETY INPUT ?
H2/6 GREEN (-) DOOR TRIGGER INPUT (N/C* OR N/O) Driver side kick panel 14 pin harness H2/8 BROWN/BLACK (-) 200mA HORN HONK OUTPUT - ?
H2/9 DARK BLUE (-) 200mA STATUS OUTPUT - ?
H2/10 PINK (-) 200mA IGNITION 1 OUTPUT - ?
H2/12 VIOLET (+) DOOR TRIGGER INPUT - ?
H2/16 BROWN (+) BRAKE SHUTDOWN INPUT - ?
H2/18 VIOLET/YELLOW (-) 200mA STARTER OUTPUT - ?
H2/19 BLUE (-) TRUNK PIN/ INSTANT TRIGGER INPUT (N/C OR N/O) - ?
H2/23 VIOLET/WHITE TACHOMETER INPUT Passenger side Shock tower (Blue Wire)
Door Lock, 3-pin connector
1 BLUE (-) 500mA UNLOCK OUTPUT Passenger side behind glove box brown harness adapter
2 EMPTY NOT USED
3 GREEN (-) 500mA LOCK OUTPUT - Passenger side behind glove box brown harness adapter

If anyone could verify these connections as well as any connections that I MUST HAVE in order to make this thing work.
Reply With Quote
  #2 (permalink)  
Old 09-05-2013, 06:49 PM
I'm New
 
Join Date: Aug 2013
Posts: 4
iTrader: (0)
sixtysixninjas is on a distinguished road
Re: Alarm Wiring Help...

Constant 12V+ White Ignition Switch Harness or OEM Alarm Connector
Starter Black/White Ignition Switch Harness
Ignition Black/Yellow Ignition Switch Harness
Accessory Yellow Ignition Switch Harness
Tach Blue Test Connector Passenger's Shock/Strut Tower
Neutral Safety Wire Green/White Gray 12 Pin Connector at Shift Position 7
Brake Switch Green/White Brake Switch
Trunk Pin Green/Black (-) Above Hood Release Gray 14 Pin Connector
Parking Lights Red/Black Light Switch
Head Lamp Red/Green (+) Switch
Hood Pin n/a
Factory Disarm n/a
Door Trigger Black/White (-) Above Hood Release Gray 14 Pin Connector
Door Lock Black/White (-) Passenger's Kick 10 Pin Connector or at OEM Alarm
Door Unlock Black/Red (-) Connector left of Steering Column
Horn Wire Blue/Black (-) Yellow 6 Pin Connector POS 1 Driver's Side


from the12volt.com
Reply With Quote
  #3 (permalink)  
Old 09-09-2013, 07:52 PM
I'm New
 
Join Date: Jun 2013
Posts: 4
iTrader: (0)
92LudeSI15 is on a distinguished road
Re: Alarm Wiring Help...

Yes I get that but I am getting no response from my system at all. I have used 12volt and lilmspreludes guide but still can't seem to get it. Am I missing a wire or something some where... I currently have

H1/1
H1/2
H1/3
H1/5

H2/6
H2/10
H2/16

And the H3 door lock harness

Connected. The system is a viper 5204... Anyone with any insight on what I am doing wrong please post it. This has been frustrating me for a few days now
Reply With Quote
  #4 (permalink)  
Old 09-15-2013, 03:10 AM
I'm New
 
Join Date: Aug 2013
Posts: 4
iTrader: (0)
sixtysixninjas is on a distinguished road
Re: Alarm Wiring Help...

If you get nothing from the system you need to check 12v constant on your vipers fused wires and your ground contact is should at least click when you have both after that the minimum you have to do is get the antenna plugged in then the remote fob programmed to the unit which should be ignition on press and release button on antenna then press and hold the alarm module should click then while still holding the button on the antenna press lock
Reply With Quote
  #5 (permalink)  
Old 09-15-2013, 03:16 AM
I'm New
 
Join Date: Aug 2013
Posts: 4
iTrader: (0)
sixtysixninjas is on a distinguished road
Re: Alarm Wiring Help...

You also must have an alarm/starter because why would an alarm unit have a tach input it doesn't really need to know the cars running so there should also be a pink,pink/black/orange and purple wire for ignition accessory and start?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Alarm Installation - Wiring Diagram tommyc 4th Gen Honda Prelude 1 07-20-2013 05:59 PM
what alarm do you use? ridebikes24 5th Gen Honda Prelude 19 12-24-2010 10:48 PM
Removing alarm system (wiring) & clutch question? Terror General Tech Talk 4 07-20-2010 04:36 PM
Alarm? xshadownetx 5th Gen Honda Prelude 21 01-14-2010 10:14 AM
Alarm Help FlipSide24 5th Gen Honda Prelude 0 04-24-2009 08:57 PM


All times are GMT -4. The time now is 02:09 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors


Copyright © 2006-2009 PreludeZone.com All Rights Reserved.