ok so when im driving my brake light goes on (same one when e-brake is engaged)
it happens to turn on when I brake for a speed bump also when i do a hard turn
im not leaking brake fluid and just replace my brake cylinder an guesses why it turns on

__________________
1994 honda prelude si vtec

ihad the same problem just 3 days ago.. and i had this http://www.autozone.com/autozone/par...5_132297_2362_ broken and bent... i hope this isnt thecase with u, but i would have it checked.

Check your brake reservoir bottle. Might be slightly low and everytime you apply the brakes and pushes pressure back into the bottle and/or when you're braking while turning that the fluid level tilts and triggers the sensor. Also look along the brake lines and check to see if there's any moisture to determine if you have a leak from the lines or not.

__________________

SIG by MS PEDO
BUSTR BUILT PERFORMANCE

http://www.preludezone.com/auto-show...tml#post376941

N.Y.P.O.C. FB----> Like us! http://www.facebook.com/#!/pages/NYPOC/131187396961077

You can shut the brake warning light up by grounding it off. See the how to below

Disable 4G 'Brake Lamp' warning light - Wiki-Lude | The UK Honda Prelude Club | Lude Generation

This worked for me after one of my rear sensors developed a fault and the light came on after I touched the brake pedal.

__________________

UKDM RHD 2000 2.2 VTi 4WS BB8 H22a8 - All Motor JDM RHD 1993 2.2 SI VTEC 2WS BB4 H22a

that link lead to the upper control arm for the front suspension... upper control arm wouldn't cause that problem.

wouldn't do this. you have warning lights for a reason. ignoring them is when things go wrong. god forbid the day someone cuts your break lines or you develop a leak, you'll know before it's to late.

this is pretty much your answer. since you just had your BMC replaced, i would check around that area for leaks.

__________________
μολὼν λαβέ from my cold, dead hands


"Voting FOR someone based on race/skin color is IDENTICAL to voting AGAINST someone based on race/skin color. Judge someone (positively or negatively) based solely on their race, by definition YOU ARE A RACIST... period" -Me

I do take your point. However since my light comes on and I know there isnt a fault I will certainly know when there is a problem with my brakes before the stupid sensor does . And if the brake probelm is so catastrophic so to endanger your life, a little light on the dash is going to do nothing for you.

__________________

UKDM RHD 2000 2.2 VTi 4WS BB8 H22a8 - All Motor JDM RHD 1993 2.2 SI VTEC 2WS BB4 H22a

if you say so....

__________________
μολὼν λαβέ from my cold, dead hands


"Voting FOR someone based on race/skin color is IDENTICAL to voting AGAINST someone based on race/skin color. Judge someone (positively or negatively) based solely on their race, by definition YOU ARE A RACIST... period" -Me

ok i check the line an i happen to be leaking so i just tighten it up
thought to solve the problem The light still goes on doesnt bother me a bit
because the brakes functions properly.
Thanks for the help

__________________
1994 honda prelude si vtec

means your fluid is low. refill it. and it probably wouldn't hurt to bleed them.

__________________
μολὼν λαβέ from my cold, dead hands


"Voting FOR someone based on race/skin color is IDENTICAL to voting AGAINST someone based on race/skin color. Judge someone (positively or negatively) based solely on their race, by definition YOU ARE A RACIST... period" -Me

ok so now i refilled it but the abs light and the brake light stay on most the time

__________________
1994 honda prelude si vtec

sorry on the late update but found out the problem
it happen to be one of my brake pads it was wored
out it scratch the disc pretty deep so replaced every thing

__________________
1994 honda prelude si vtec